|
redsoxnation32 (November 30, 1999 at 12:00 am)
It was actually the power tube one of the pieces wasnt pushed in. It was actualy your power tube vid that helped me solve the problem. THank you sooooooo much. Keep up the great videos
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
Make sure there is nothing in the Valve that is prohibiting it from sliding in, and make sure you didn't put the Push-Pin in that holds the Tombstone in place.
redsoxnation32 (November 30, 1999 at 12:00 am)
my tombstone will not go back in. What do i do?
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
Yes, you will just have a piece that goes from the trigger/grip into the receivers and out the right side. Make sure you don't misplace that.
supersniper70 (November 30, 1999 at 12:00 am)
i have a response trigger on mine. could i take it apart the same way or not?
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
Than you will need to do some serious modding that can not be rolled back. Once you remove the ball catcher on the right side, you will have to get a new receiver if you want to use the Cyclone again.Search Google for a How To on installing a Q-Loader on the A-5.
PedrofromHell (November 30, 1999 at 12:00 am)
What if you're using a Q-Loader?
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
You can take it off, but you'll have to do some serious modding to fit a different hopper on it. In the end it's just easier and cheaper to sell the A-5 and get a different gun if you don't like the Cyclone.
PedrofromHell (November 30, 1999 at 12:00 am)
Is it possible to use the A5 without the cyclone feed system? Personally, I don't have a need for a fast rate of fire, and getting rid of the weight and size of the cyclone would be great. Can you just take it off?
czechmar (November 30, 1999 at 12:00 am)
Is the a-5 a good gun....I'm definitely thinking about getting it... |
